EVITP Certification: A Deep Dive for Electricians
The Short Answer
EVITP (Electric Vehicle Infrastructure Training Program) is the industry-recognized credential for electricians specializing in EV charger installation. It requires a current electrician's license, covers NEC 625, load calculations, EVSE installation practices, and safety — and is increasingly required by utilities, fleet operators, and federal EV grant programs.
As EV charging infrastructure funding flows through federal and state programs, EVITP certification has gone from a nice-to-have credential to a requirement on an increasing number of commercial and fleet projects. Here is what the certification actually covers, how to earn it, and what it is worth.
EVITP is a training and certification program developed by labor-management partnerships to standardize EV charger installation skills among licensed electricians. It is required or preferred by many utilities (including those administering EV rebate programs), commercial fleet operators, and federal NEVI-funded EVSE projects. Eligibility requires a current journeyman or master electrician license.
Eligibility Requirements
- Must hold a current journeyman electrician license (or master license) in your state or jurisdiction
- Apprentices may take the training but cannot sit for the certification exam until licensed
- No minimum years of experience beyond holding an active license
- Some training providers require completion of their EVITP-approved course before the exam
EVITP Curriculum: What You Learn
| Module | Key Topics Covered |
|---|---|
| NEC Article 625 | EVSE circuit requirements, continuous load, equipment listing |
| Load calculations | NEC 220 service sizing, panel capacity assessment |
| EVSE equipment | Level 1, 2, DCFC — hardware, connectors, cord sets |
| Installation practices | Conduit, conductors, grounding, bonding, outdoor/wet locations |
| Electrical safety | OSHA arc flash, PPE, lockout/tagout for EVSE work |
| Permits & inspection | AHJ coordination, inspection documentation, commissioning |
| Emerging technology | OCPP basics, smart charging, V2G awareness |
Exam and Cost
The EVITP certification exam is a proctored written test covering the curriculum modules above. Course and exam fees vary by provider and typically range in the $395 range. IBEW-affiliated training centers often offer EVITP at reduced cost or free for union members. The certification must be renewed periodically (typically every three years) with continuing education.
Where EVITP Is Required
- NEVI (National Electric Vehicle Infrastructure) formula-funded projects — federal requirement for installer certification
- Many utility EV charging rebate programs (Pacific Gas & Electric, ComEd, etc.) require EVITP installers
- Commercial fleet charging deployments by major operators (Amazon, FedEx, UPS) increasingly specify EVITP
- State EV infrastructure grant programs in CA, NY, IL, TX, and others list EVITP as preferred or required
- Some insurance underwriters offer lower liability rates for EVSE work by EVITP-certified electricians
The Business Case for EVITP
EVITP Opens Doors to Government-Funded Projects
The federal NEVI program is allocating $5 billion for EV charging infrastructure through 2026. Many state grant programs require or strongly prefer EVITP-certified contractors. A single commercial DCFC installation can be worth $50,000–$300,000+ in revenue — the certification pays for itself on the first qualifying project.
Ready to stop reading and start earning?
The complete EV Charger Installation Business course
One-time $39. Lifetime access. 13 bonuses including contracts, pricing calculators, and commercial bid templates. No subscription, no upsells.
Frequently Asked Questions
How long does EVITP certification take?
The training course is typically 8–16 hours (one to two days) of instruction. The exam is 2–3 hours. Most electricians can complete the full process in a single weekend or over two weekdays.
Is EVITP recognized nationally?
Yes. EVITP is a nationally recognized credential administered through a network of approved training centers. The certification is portable across states and is recognized by federal program requirements including NEVI.
Do I need EVITP to install residential EV chargers?
No — residential EVSE installation typically requires only a licensed electrician and a permit. EVITP is not required for most residential work. However, having the credential differentiates your business and signals expertise to homeowners.
Related Guides
Michael Rivera
Texas Master Electrician with 12+ years in the trade and 500+ EV charger installations. Lead instructor at EVCharger Academy.
Learn Michael's full install-business system in the $39 EVCharger Academy course.